Carboline Phenoline® 379 5 GAL

Manufacturer: Carboline
Product Description

Carboline® Phenoline® 379 is used on steel and concreat substrates as a single-coat, airless-applied, ultra-high build coating- subject to aggressive chemical exposure. Phenoline® 379 has the same application and physical properties of Phenoline® 309, but provides enhanced chemical protection for a broader and more concentrated range of acids.

  • Single coat application reduces labor costs
  • Ultra-high build capabilities provides a voidfree film and excellent edge protection
  • Resistant to inorganic and organic acids, caustics and most solvents
  • Can be mat reinforced where exposure conditions dictate
  • Application by airless spray equipment (plural component acceptable but not required)
  • VOC compliant to current AIM regulations

Listed below are general equipment guidelines for the application of this product. Job site conditions may require modifications to these guidelines to achieve the desired results.

Spray Application (General) Recommended for application by single or plural component airless spray. This is a high solids coating and may require adjustments in spray techniques. Wet film thickness is easily and quickly achieved. The following spray equipment has been found suitable and is available from manufacturers.

Conventional Spray Not recommended

Airless Spray
Pump Ratio: 45:1 (min.)*
GPM Output: 3.0 (min.)
Material Hose: ½” I.D. (min.)
Tip Size: .021-.035”
Output PSI: 2700-3000
Filter Size: 60 mesh
*PTFE packings are recommended and available from the pump manufacturer. Contact Carboline
Technical Service for plural component equipment recommendations.

Brush & Roller (General) Not recommended for tank lining applications except when striping welds.

Brush For touch up and limited areas only.

Roller For touch up and limited areas only.