Carboline Carbothane® 134 HG

Manufacturer: Carboline
Product Description

Carboline® Carbothane® 134 HG provides has a thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets. Carbothane®134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

Contact for availability in a variety of colors.

$109.25

This material is hazardous. An additional freight cost will be added to your order after checkout. Please select "Best Way PPC" for the shipping method and "Pay Offline Via Credit Card" for the Payment method. We will contact you to process your order within normal business hours.

  • High solids, low VOC content
  • Excellent weatherability
  • Exceeds SSPC Paint 36 specification for a Level 3 urethane
  • Available in all Carboline colors including metallicpigmented colors
  • Excellent flow characteristics allow for application by spray or roller
  • Superior impact and abrasion resistance
  • Indefinite recoatability
  • VOC compliant to current AIM regulations
  • Suitable for use in USDA inspected facilities

Listed below are general equipment guidelines for the application of this product. Job site conditions may require modifications to these guidelines to achieve the desired results.

Spray Application (General) This is a high solids coating and may require adjustments in spray techniques. Wet film thickness is easily and quickly achieved. Spray equipment is available from manufacturers such as Binks, DeVilbiss and Graco.

Conventional Spray Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap.

Airless Spray
*Pump Ratio: 30:1 (min.)
GPM Output: 3.0 (min.)
Material Hose: 3/8” I.D. (min.)
Tip Size: .015-.017”
Output PSI: 2100-2400
Filter Size: 60 mesh
*Teflon packings are recommended and available from the pump manufacturer.

Brush & Roller (General) Multiple coats may be required to obtain desired appearance, recommended dry film thickness and adequate hiding. Avoid excessive re-brushing or rerolling. For best results, tie-in within 10 minutes at 75°F (24°C).

Brush Recommended for touch-up only. Use a medium, natural bristle brush.

Roller Use a short-nap mohair roller cover with phenolic core.