Carboline Carbothane® 133 LH 5 GAL

Manufacturer: Carboline
Product Description

Carboline® Carbothane® 133 LH provides a high build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates. This material provides very good weathering performance, and is available in a broad range of colors.

$0.00
  • Exceeds SSPC Paint 36 specification for a Level 3 urethane
  • Outstanding performance properties in both mild and aggressive environments
  • High build; suitable for many two-coat systems
  • Application by spray, brush or roller
  • Indefinite recoatability
  • VOC compliant to current AIM regulations
  • Low HAPs content

Listed below are general equipment guidelines for the application of this product. Job site conditions may require modifications to these guidelines to achieve the desired results.

Spray Application (General) This is a high solids coating and may require adjustments in spray techniques. Wet film thickness is easily and quickly achieved. The following spray equipment has been found suitable and is available from manufacturers such as Binks, DeVilbiss and Graco

Conventional Spray Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap.

Airless Spray
Pump Ratio: 30:1 (min.)*
GPM Output: 3.0 (min.)
Material Hose: 3/8” I.D. (min.)
Tip Size: .013-.015”
Output PSI: 2100-2300
Filter Size: 60 mesh
*Teflon packings are recommended and available from the pump manufacturer.

Brush & Roller (General) Multiple coats may be required to obtain desired appearance, recommended dry film thickness and adequate hiding. Avoid excessive rebrushing or rerolling. For best results, tie-in within 10 minutes at 75°F (24°C).

Brush Recommended for touch-up only. Use a medium, natural bristle brush.

Roller Use a medium-nap synthetic roller cover with phenolic core.