 |
Anco
system 5625 flexible air duct is a very versatile air
duct product capable
of
performing
in
a
multitude of low to high-pressure residential or commercial HVAC applications.
System 5625
is well suited for main trunk lines, supply and return lines, connecting lines,
as well as runs to diffusers and room registers. As class 1 air ducts, there
are no associated limitations for installed length unless limited by a code body.
System
5625 flexible air duct is constructed around Anco's "ULTRA
10" core.
The core is wrapped with a thick blanket of thermally
certified energy saving insulation. A protective seamless
vapor barrier of 2 ply metalized polyester / polyester
reinforced with scrim yarn then covers the core and the
insulation. This provides you with a class 1 air duct
material with certified thermal R-values.
Sizes include: 3", 4", 5", 6", 7",
8",
9", 10", 12", 14", 16", 18" and
20" diameters and lengths are 25'. System 5625
is available with fittings attached with UL 181-B tape and
is packaged in either corrugated boxes or poly bags.
Code
Approvals: This product meets or exceeds the requirements
of most federal, state, and local codes including UL
181; NFPA 90A/90B; HUD/FHA Std 515; Standard Mechanical
Code; National Mechanical Code; Uniform Mechanical Code;
Florida Energy code; the Cities of Chicago and Yew York,
etc. just to name a few. We recommend you always check
with your local authorities when in question.
Vapor
Barrier: Very durable, puncture resistant metalized polyester/polyester
vapor barrier reinforced with scrim yarn that provides
improved protection against UV light. The metalized vapor
barrier is designed to match aesthetically with FSK board
materials.
|
Duct
Wrap