 |
Stainless
Steel Banding
Stainless steel banding is manufactured
from stainless steel with a special soft annealed temper
to
facilitate
handling. It is available in 3/8", 1/2" and
3/4" widths.
Stainless steel banding offers the greatest strength
and corrosion
resistance.
Stainless Steel Wing Seals
Stainless steel wing seals are manufactured from heavy
duty annealed stainless steel. These seals are .032"
in thickness to allow for maximum tensioning and binding
power. They are available in 3/8", 1/2" and
3/4" widths.
Stainless Steel Tie Wire
Stainless steel tie wire is manufactured from specially
drawn soft annealed alloy. It is available in 18 and
16 gauge thickness.
Aluminum Banding
Aluminum banding is manufactured from high quality aluminum
alloy. It is .020" in thickness to allow for maximum
tensioning. Aluminum banding is available in 3/8",
1/2" and 3/4" widths. Aluminum banding is to
be used where maximum tension or severe corrosion resistance
is not required.
Aluminum
Wing Seals
Aluminum wing seals are manufactured from heavy duty
hard temper aluminum. These seals are .032" aluminum
to allow for maximum tensioning and binding power. Aluminum
wing seals are available in 3/8", 1/2" and
3/4" widths.
Galvanized Strapping
Galvanized strapping is manufactured from prime quality
zinc coated steel. It is available in 1/2" and 3/4" widths
only. It is not recommended where tension is necessary
or strength a factor. It is recommended for economy purposes
and where corrosion is not a factor.
Galvanized Wing Seals
Galvanized wing seals are manufactured from heavy duty
.032" thick cold rolled steel strip which is double
plated with zinc. This eliminates exposed steel edges
which
can corrode after installation. Galvanized wing seals
are available in 1/2" and 3/4" widths only.
They should be used for economy purposes and where corrosion
is not a factor.
|
Duct
Wrap